High Precision ER Milling Chuck Set
ER milling chuck set is in hege-precision spantang chuck set, de spantangen binne spring-load, sadat se kinne grip in ferskaat oan maten.Dizze chuck-set is perfekt foar gebrûk mei mûnen en oare presysmasines.
| Bestelnr. | Hole Grutte | PCS/SET | |
| inch | mm | ||
| ER16-8in(mm) | 3/32 1/8 3/16 7/32 1/4 5/16 11/32 3/8 | 2 3 4 5 6 7 8 10 | 8 |
| ER25-6in(mm) | 1/8 3/16 5/16 3/8 1/2 5/8 | 4 6 8 10 12 16 | 6 |
| ER25-10in(mm) | 3/32 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 | 3 4 5 6 8 10 12 14 15 16 | 10 |
| ER32-6in(mm) | 1/4 5/16 3/8 1/2 5/8 3/4 | 6 8 10 12 16 20 | 6 |
| ER32-12in(mm) | 3/32 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 | 3 4 5 6 8 10 12 14 15 16 18 20 | 12 |
| ER40-8in(mm) | 1/8 1/4 3/8 1/2 5/8 3/4 7/8 1 | 3 5 8 12 15 18 22 26 | 8 |
| ER140-15in(mm) | 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 | 3 4 5 6 8 10 12 14 15 16 18 20 22 24 26 | 15 |
Diskusje fan Draw Bar
| Taper fan spantang chuck | Draad fan tekenbalke | |
| R8 | 7/16–20UNF | |
| 7:24 30 | M12×1,75 | 1/2–13UNC |
| 7:24 40 | M16×2.0 | 5/8–11UNC |
| 7:24 50 | M24×3.0 | 1-8UNC |
| MS2 | M10×1.5 | 3/8–16UNC |
| MS3 | M12×1,75 | 1/2–13UNC |
| MS4 | M16×2.0 | 5/8–11UNC |
| MS5 | M20×2.5 | 3/4-10UNC |
| MS6 | M24×3.0 | 1 ＂ -8UNC |
Notifisearje asjebleaft de tried fan spantang-trekbalk en de spesifikaasje fan spanten (metrysk as inch)
Meitsje asjebleaft de lingte fan rjochte skaft en dia.
Wy binne bliid te leverjen collets en chucks mei ferskillende shank en hoemannichten neffens jo eask.
